How to Make a Longboard Wall Hanger: The Simple DIY Guide

How to Make a Longboard Wall Hanger, a man carrying his longboard

If you are a longboarder, you may have experienced the struggle of storing your board when it’s not in use.

Throwing it in the corner of your room or leaving it on the ground can damage it over time. The best solution is to create a longboard wall hanger to keep your board safe and secure.

In this article, we will show you how to make a longboard wall hanger step by step.

How to Make a Longboard Wall Hanger, an infographic showing all steps involved

Materials Needed

Before we begin, let’s gather the materials we will need:

  • Wooden board
  • Saw
  • Sandpaper
  • Wood stain or paint
  • Drill
  • Screws
  • Wall anchors
  • Measuring tape
  • Pencil
  • Level

Step 1: Cutting the Wooden Board

The first step is to cut the wooden board to the desired length.

A 2×4 board that is 2 feet long should suffice.

Use a saw to cut the board to size.

Step 2: Sanding the Board

After cutting the board, use sandpaper to smooth the surface.

Start with a rough grit sandpaper and work your way to a finer grit.

Sanding the board will ensure that the finish adheres properly.

Step 3: Staining or Painting the Board

Now it’s time to stain or paint the board.

This step is optional, but it will give your wall hanger a finished look.

Use a wood stain or paint of your choice and apply it evenly to the board.

Let it dry completely.

Step 4: Measuring and Marking the Board

Measure and mark the board where you want to place the hooks.

The hooks should be placed about a foot apart.

Use a level to ensure that the marks are straight and evenly spaced.

Step 5: Drilling the Holes

Use a drill to create holes where you marked the board.

The holes should be slightly smaller than the screws you will be using.

This will ensure a tight fit and prevent the screws from slipping.

Step 6: Installing the Hooks

Insert the screws into the wall anchors and then into the holes you drilled.

Make sure the hooks are securely fastened to the board.

Step 7: Hanging the Longboard

Now it’s time to hang your longboard.

Simply place the longboard on the hooks and adjust as necessary to ensure that it is level.


You have successfully created a longboard wall hanger.

Tips for Maintaining Your Longboard Wall Hanger

  • Check the screws periodically to make sure they are tight.
  • Avoid placing heavy objects on the board.
  • Keep the board away from direct sunlight to prevent the wood from warping or cracking.
  • Use a soft cloth to clean the board as needed.


Creating a longboard wall hanger is a simple and effective solution for storing your longboard.

By following these steps, you can make your own wall hanger and keep your board safe and secure.

But what if you don’t have the time or skills to make your own longboard wall hanger?

Don’t worry, our professional, functional and durable Longboard Hanger LV20 has you covered!


How much weight can a longboard wall hanger hold?

A properly installed longboard wall hanger can hold up to 30-40 pounds.

Can I use the same method to make a wall hanger for a skateboard?

Yes, you can use the same method to create a wall hanger for a skateboard.

Can I use a different type of wood for the board?

Yes, you can use any type of wood that is strong enough to hold the weight of your longboard.

How long does it take to make a longboard wall hanger?

It should take approximately 1-2 hours to make a longboard wall hanger.

Can I buy a pre-made longboard wall hanger?

Yes, you can buy pre-made longboard wall hangers online or at your local skate shop.

However, making your own can be a fun and rewarding DIY project.

Do I need to use a 1×6 board?

No, you can use any size board you’d like.

Just make sure it’s at least as long as your longboard and wide enough to fit the hooks.

How do I know where to place the hooks?

Place your longboard on top of the board and mark where the trucks sit.

This is where you’ll drill the holes for the hooks.

Do I need to stain or paint the board?

No, staining or painting the board is optional.

It’s up to you if you want to add some color or texture to your longboard wall hanger.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.